The wait is over!


I would like to Introduce the Mr. Steele V4 STOUT 2306 (1750KV) 6S FPV freestyle motor. 


I take great pride in my work and am always trying to raise the bar. After two years of seemingly nonstop research & development, I am proud to present this fine piece of Miniquad motor engineering. 


V4 MOTOR HIGHLIGHTS/CHANGES 

  • base redesign 16x16(only) mounting holes (structural changes for more durability)
  • Complete bell redesigned (durability and smoothness in mind)
  • Thicker single strand copper winding 
  • increased EFFICIENCY & POWER 
  • Complete Interchangeable motor pants redesign (thicker & more crash/low temperature resistant, better gap fitment, + more protection coverage for the “tall pants”)
  • better assembly tolerances 
  • Overall QC improvements
  • 9mm steel bearings  
  • Eco-Friendly packaging 
  • Motor weight 31.8g 
  • (full-length cables) compared to Stout V3 at 30.5g 

PANTS WEIGHTS 

  • Low - 1g vs (0.8 v3)
  • Tall - 2g vs (1.8 v3)

All in all this motor is an absolute gem only increasing the weight by a tad over 1g from the previous model while achieving more power, efficiency, and most importantly durability. 


V3- V4 COMPATIBILITY 

  • V4 and V3 motors are completely cross-compatible. 
  • V3 bells - V4 stator 
  • V4 bells - V3 stator 

( everything is interchangeable except pants) The pants are stator-specific and can be interchangeable but with less than desired effect. 


 Enjoy & Thank you for your continued support.


-Steele


Specification:

Stator Size (Diameter): 23mm*6mm

Kv: 1750kv

Magnets: N52SH Curved

Windings: 15turn DLRK

Shaft Length (mm): 11.5mm

Shaft Diameter (mm): 4mm

Shaft material: Steel

Bearing : NMB684

Weight (With Wires) (g): 32.4g

Cells (Lipo): 6S

Max Current (A): 45A

Max Burst Current (A): 50A

Internal Resistance (Rm): 100mΩ

Wire Spec (AWG): 20#-135mm

Base Mounting Pattern: 16x16mm

Base Mounting Thread: M3 Thread

Motor Overall Dimensions: φ28.6mm*17.5mm


Package Included:

1 x Motor

1 x Tall Motor Pants

1 x Short Motor Pants

4 x motor screws

Motors
Motor KV 1750kv

Uzrakstīt atsauksmi

Please login or register to review

Ethix Mr Steele Stout Motor V4

  • Ražotājs: Team Blacksheep
  • Produkta kods: Stout V4
  • Pieejamība: Noliktavā
  • 28.90€

  • bez PVN: 23.88€

Related Products

HQProp ETHiX S3 5X3.1X3 Watermelon Propellers

HQProp ETHiX S3 5X3.1X3 Watermelon Propellers

Mr Steele’s preceded watermelon theme S3 propsSpecifikācijaPropeller Diameter: 5 inch    &..

3.30€ bez PVN: 2.73€

HQProp ETHiX S4 5X3.65X3 Lemon Lime Propellers 2CW + 2CCW

HQProp ETHiX S4 5X3.65X3 Lemon Lime Propellers 2CW + 2CCW

Mr Steele’s  lime theme S4 propsSpecification:Propeller Diameter: 5 inchPitch : 3.65Blades : 3M..

3.30€ bez PVN: 2.73€

HQProp ETHiX S5 5X4X3 Light Grey Propellers 2CW + 2CCW

HQProp ETHiX S5 5X4X3 Light Grey Propellers 2CW + 2CCW

Specification:Propeller Diameter: 5 inch       Pitch : 4      &nb..

3.30€ bez PVN: 2.73€

HQProp ETHiX P3 5.1X3X3 Peanut Butter & Jelly Propellers 2CW + 2CCW

HQProp ETHiX P3 5.1X3X3 Peanut Butter & Jelly Propellers 2CW + 2CCW

SpecifikācijaPropeller Diameter: 5.1 inch      Pitch : 3      &nb..

3.30€ bez PVN: 2.73€

HQProp ETHiX P4 5.1X4X3 Candy Cane Propellers 2CW + 2CCW

HQProp ETHiX P4 5.1X4X3 Candy Cane Propellers 2CW + 2CCW

Specification:Propeller Diameter: 5.1 inch      Pitch : 4      &n..

3.30€ bez PVN: 2.73€

Tags: ethix, 1750kv, 6s, mrsteele, mr steele