The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency.

Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images.Meanwhile, it's better fit for regular FPV race as well.

The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.

In addition to the original 25mm x 25mm mounting holes, the kit now added 20mm x 20mm holes for greater compatibility with a wider range of FPV drone models.   

Updated the design of PCB board and shell, improved the quality of VTX, more durable.

Optimized the installation place of the antenna, so as to better protect the VTX.

The position of the frequency binding button has been changed to make the frequency binding operation more convenient.

A spare pad is added to provide two power connection modes.

New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to25.2V, our VTX delivers unmatched stability and resistance to GPS interference. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.

The Avatar VTX comes with 88g32g built-in storage it can record 1080p or 720p HD flight videos without interference.32G built-in storage, recording video time increased by 4 times.

FEATURES

• 1080P 120fps compatibility
• 22ms low latency
• Ranging Mode
• 4KM range
• Light weight design
• FOV160°
• Built-in 32G storage, 
• Support Gyroflow
• GPS anti-jamming
• 6V-25.2V
• The only native 4:3 high-definition sensor in the FPV industry

Specification: 

Camera

• Image Sensor 1/3.2-Inch 4Mp 4:3sensor
• Resolution 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; 
• Ratio 4:3 native /16:9
• Lens 2.1mm
• FOV 160°
• Aperture F2.0
• Shutter Rolling shutter
• Min.Illumination 0.001Lux
• Weight 7.2g
• Dimensions 19*19*22mm
• Coaxial Cable 140mm
• Gyroflow Only 32G VTX Supported

VTX

• Communication Frequency 5.725-5.850GHz
• Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
• MIC:<25dBm
• 1/O Interface JST1.0*4(Power in)JST0.8*6(USB)
• Mounting Holes 25.5*25.5mm; 20*20mm
• Dimensions 33.5*33.5*10.5mm
• Storage 32G
• Recording 1080p/720p
• Weight 17.6g
• Operating Temperature -20-40℃
• Channels 8
• Wide Power Input 6V-25.2V
• Supported FC System Betaflight; Inav; Fettec; ArduPilot; Kiss
• OSD Canvas mode
• Latency Average delay 22ms
• Antenna 1(IPEX)

Avatar V2 antenna

• Polarization LHCP
• Bandwidth 5600MHz-6000MHz
• Gain 1.9dBi
• VSWR ≤1.5
• Input Impedance 50Ω
• Interface IPEX-1
• Size R15 X 45mm （without cable）
• Weight 2g

Package Included:

1x Avatar HD KIT V2

1x USB transfer extension cable

1x 4 Pin silicone cable

8x M2*4mm screws

4x M2*5mm screws

4x M2*6mm screws

4x M2*14mm screws

4x M2*5*0.5mm gasket