- Wide 9V to 55V Operating Input Range with TVS protection
- 3x independent Step-Down Voltage Regulators
- BEC Vx, 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.
- BEC 5V (Fixed), 4A continuous
- BEC 12V (Fixed), 4A continuous
- 1K:20K voltage divider built-in (Volt = 1/21 Input voltage)
- Current sensor signal passthrough pad
- Size & Weight: 61x40x15mm, 53g
BEC Vx
Output voltage 5.25V / 6V / 8V options.
Output voltage tolerance 1.5%
Synchronous switching step-down (or buck) regulator with typical efficiencies of 90% to 96%
Supports typical continuous output current of up to 15A, Peak current of up to 25A.
Output ripple 32mV (VIN=50V, Output 5.25V @ 15A), 43mV (VIN=50V, Output @ 5A)
Standby current: 10~20mA
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery
Tip: Input voltage >= 15V is required for continuous output current of 15A
BEC 5V
Output voltage 5.2V, tolerance 1.5%
Supports continuous output current of up to 4A, Peak current of 6A
Output ripple 20mV (VIN=24V, Output @ 5A), 50mV (VIN=50V, Output @ 5A)
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery
BEC 12V
Output voltage 12V, tolerance 1.5%
Supports continuous output current of up to 4A, Peak current of 6A
Output ripple 18mV (VIN=24V, Output @ 5A), 32mV (VIN=50V, Output @ 5A)
Reverse Input voltage protection: No
Thermal Shutdown
Output Short-circuit tolerant (2 seconds)
Overcurrent protection & self-recovery
Tip: Input voltage >= 13V is required for stable 12V output
Specification:
5.5V to 36V Operating Input Range
Vx for servos, 5V, 6V, 7.2V, 8.2V Adj. Default is 5V.
4A Continuous load current, 7A Burst
Maximum Duty Cycle: 100%, when input voltage< setting value, Regulator output voltage = Input voltage
Output Short-circuit tolerant (3 seconds)
No protection for reversed input polarity
Pins distance: 2.54mm
Size & Weight: 26 x 21 x 5mm, 4g
Package Included:
1x PM12S-3
1x Low ESR capacitor ZLJ 63v 390uf
Tips: If the input voltage is noisy, capacitor is required to be soldered to the input pads
Matek Power Module PM12S-3
- Ražotājs: Matek Systems
- Produkta kods: PM12S-3
- Pieejamība: Noliktavā
-
52.90€
- bez PVN: 43.72€