Specification:

MCU: STM32F405

Gyro: ICM-42688P

USB Port Type: Type-C

Barometer: SPA06-003

OSD: Supported

Bluetooth BLE: Supported, Bluetooth speed enhancement - 2.0

Wireless Flight Controller Firmware Update:Supported (no need to press physical BOOT button)

Wireless Download & BlackBox Analysis: Not supported

DJI Air Unit Connection Method: Supports both 6-pin direct insertion and soldering

6-pin DJI Sky Port Direct Insertion: Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order

Flash (for BlackBox): 8MB

Betaflight CC Pads (Camera Parameter Adjustment): Supported

Input Voltage: 3S-6S LiPo battery

4V5 Output: Two 4V5 outputs; total current 1A

5V BEC Output: Three 5V outputs; total current 2A; shared with 4V5

9V BEC Output: None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A

MOTOR: M1-M4

UART: 4 full-function serial ports (UART3, UART4, UART5, UART6 + SBUS[R2])

ESC Telemetry: None

I2C: Supported

LED Pads: Supported, used to control WS2812 LED lights

Buzzer Pads: Supported, BZ+ and BZ- pads

BOOT Button: Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery

Supported Flight Controller Firmware: BetaFlight (Default), INAV

Firmware Target Name: SPEEDYBEE F405AIO

Mounting: 25.5 x 25.5mm, 2mm hole diameter

Dimensions: 33.0mm (length) x 33.0mm (width) x 8mm (height)

Weight: 13.6g (including CNC)

ESC

Input Voltage: 3-6S LiPo battery

Continuous Current: 40A

Burst Current: 45A (10s)

ESC Protocol: Supports DSHOT600/300; other protocols may cause severe errors, please use with caution.

Output Voltage: VBAT battery voltage (used to power the flight controller)

Current Sensor: Supported (Scale = 254, Offset = 0)

Firmware: Bluejay JH-40 48kHz

Package Included:

1x SpeedyBee F405 AIO

1x Soldering practice board

1x DJI air unit 6pin*80mm connection cable

1x 35V 470uF Electrolytic Capacitor

4x M2*6.6mm damper

5x M2 silicone ring

5x M2 nylon hex nut

1x XT30 cable

1x Type-C extension module

1x Power expansion board

1x BEC

1x Black Heat shrink tube (USC-C extension)

1x 4pin*80mm cable

4x M2*20mm screw

4x M2*12mm screw

1x 6pin*30mm cable for BEC

1x Transaprent Heat shrink tube (BEC)

1x Manual

Manual/wiring