FEATURES

• STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
• InvenSense the 3rd generation IMU ICM42688-P
• 9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.
• 8motors+3servos in INAV/BF multirotor mixer.
• 2x SH1.0_8pin connector for PnP with 2x 4in1 ESC
• 1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
• USB pin breakout for connecting to external USB adapter.

Specification:

MCU: STM32F405RGT6

IMU: ICM42688-P

OSD: AT7456E, DJI OSD

Baro: SPL06-001 (I2C)

Blackbox: 16M-byte Flash memory

6x UARTs,  1x Softserial_Tx option

12x PWM outputs (8x Dshot)

1x I2C

4x ADC (VBAT, Current, RSSI, Airspeed)

2x PINIO

2x SH1.0_8pin connector for 4in1 ESC

1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)

3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)

9~16V(Vxs) output ON/OFF switchable

Dual analog camera signal switchable

Input: 9~60V (3~12S LiPo)

BEC: 5V 1.5A

BEC: Vx,  9~16V/1~2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A)

Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)

No Current Sensor built-in, supports external current sensor of PDB/4in1

ArduPilot: MatekF405-TE

INAV: MATEKF405TE

BetaFlight: MATEKF405TE

Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm

Dimensions: 36 x 36 x 9 mm

Weight: 7g

Package Included:

1x FC F405-HDTE

6x Silicon grommets M4 to M3

1x SH1.0_8pin cable 5cm,  2x SH1.0_8pin connectors

1x SH1.0_6pin to GH1.25_8pin cable for DJI Air Unit (replaced by black SH1.0-6pin to black SH1.0-6pin 12cm cable since Aug 01, 2023)