The Omnibus F4 Nano V7 flight controller uses the ICM20602 over SPI for the stable flight performance.Also onboard is AB7456 OSD chip for the BetaFlight integrated OSD.

Omnibus F4 Nano V7 using new target, supports 3-6s LIPO direct input, has 6x Hardware UARTs + 1x I2C


Modifications on v7:

Tantalum Capacitors added for noiseless gyro reading

Solder pads added for SmartAudio and Camera Control (next to Video pads)

FPC port for Frsky RX

This board now has 6 UART ports

PWM pads on the corner

5V BEC, 2A output


Features:

STM32 F405 MCU, Runs Betaflight firmware

ICM Gyro Over SPI Bus

20 x 20 mm Mounting Holes

Supports Lipo direct plugin (3-6S)

Supports 5V 1A BEC output (Buck)

STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)

More UARTs

25x25mm (20x20mm M3 mount hole)


Notice:

If you plan to use the FC with our 4in1 ESC (Wave or Ori 4in1), you only need one 8pin Cable (The Option 8pin 4in1 Cable)

 

Package Included:

1x F4 Nano FC


Lietošanas instrukcija (angļu val.)


N.B. FC only, no cables included

Uzrakstīt atsauksmi

Lūdzu login vai register lai atstātu atsauksmi

Airbot Omnibus F4 Nano V7 OSD Flight Controller (20x20)

  • Ražotājs: Airbot
  • Produkta kods: F4 Nano V7
  • Pieejamība: Izpārdots
  • 29.90€

  • bez PVN: 24.71€

Saistītie produkti

Cable JST 8 pin 30mm For 4in1 ESC

Cable JST 8 pin 30mm For 4in1 ESC

This is a silicone cable harness designed to connect your airbot flight controller directly to an ai..

1.15€ bez PVN: 0.95€

Cable JST 8 pin 70mm For 4in1 ESC

Cable JST 8 pin 70mm For 4in1 ESC

This is a silicone cable harness designed to connect your airbot flight controller directly to an ai..

1.15€ bez PVN: 0.95€

Cable set SH1.0

Cable set SH1.0

Pre-crimped silicone wires and spare JST SH1.0 connectorsPackage Included:12 x 55MM 12x 105MM 12x 15..

4.90€ bez PVN: 4.05€

Tags: micro build, 20X20