FEATURES

• Use mainstream STM32F405 chip
• Equipped with the latest 42688-P gyroscope
• 16M black box storage
• Integrated LC filter
• Upgrade type-C USB interface
• Directly plugged into the DJI Air Unit
• With TAKER H60_BLS 60A 4IN1 ESC, the flying feel is silky
• Simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
• 12V@2.5A + 5V@3A dual independent BEC

Specification:

GEP-F405-HD V3 Flight Controller

MCU：STM32F405

IMU：ICM42688-P(SPI)

Air Unit Connection：Direct plugging into DJI Air Unit

Black Box：16M onboard

Barometer: BMP280

Motor outputs：M1-M6

USB Interface：Type-C

OSD：BetaFlight OSD w/ AT7456E chip

BEC：5V@3A,12V@2.5A dual BEC

Firmware Target：GEPRCF405

Mounting: 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle

Input Voltage：3-6S LiPo

UART：6 UARTs

Power Filter：Integrated LC filter

Weight：7.3g

TAKER H60_BLS 60A 4IN1 ESC

Input Voltage: 3-6S Lipo

Ammeter: Support

Continue Current：60A

Burst Current：65A（5 second）

Support Protocol: Dshot 150/300/600

Size：42×45.7mm，hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

Weight: 14.9g

Target: B_X_30

Package Included:

1x Flight Controller

1x ESC

1x Capacitor

1x DJI Air Unit Adapter Cable

1x Flight Controller Adapter Cable

1x XT60 Power cable

4x M3*30 Screws

4x M3*25 Screws

8x Nylon nuts

8x Silicone grommets

2x sh1.0 4pinsilicone cable

1x Camera connection cable