F722 2-6S AIO 35A FC is a very reliable FC that is made to meet your advanced FPV needs. Comes with an F722 chip and BLHeli_S ESC firmware, this board provides a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight. What's more, F722 AIO 35A FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, super easy to install. It also can handle up to 6S of input voltage and push your FPV racer to the max.

FEATURES

• Compare with F4 AIO 35A FC, F722 FC's firmware is upgraded from F411 to F722, providing a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight.
• F722 AIO 35A FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the DJI Digital VTX system.
• 6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver, and other components.
• It can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.
• With the 6S battery and this F722 35A AIO toothpick FC, the drone will break through the limit of the power of the toothpick drone, exploring more possibilities in 4-5'' drones.

Specification:

Weight: 7.06g

CPU: STM32F722RET6

Six-Axis: MPU6000 (SPI connection)

Mounting hole size: 26mm * 26mm

Firmware version: betaflight_4.2.x_BETAFPVF722

OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)

Support programmable LED like WS2812 etc

Built-in current sensor

Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)

Input voltage: 2S-6S Lipo

Continuous current: 35A

Peak current: 40A

ESC firmware: BLHeli_S

Indicators: 2 indicators: receiver indicator (green)/Flight control power indicator (red)

Capacitance: CS|5*10*13mm|470μF|35V

Connecter: 80mm 14AWG silicone cable with XT60

Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series

Package Included:

1x Toothpick F722 35A AIO 2-6S brushless flight controller

1x Cable Pigtail (XT60U)

1x Capacitance

1x 6-Pin Connector for DJI Digital VTX

4x M2x10mm Screws

8x M2 Nuts