• BetaFPV F4 1S 12A AIO Brushless Flight Controller V2.1 - ELRS 2.4G

F4 1S 12A AIO Flight Controller - A 1S 12A FC for building lightweight 3" toothpick drones like HX115 SE Toothpick Drone and HX115 LR Toothpick Drone. If you want to try a bigger FPV drone than 65mm/75mm on 1S power, and still want smooth and powerful flying actions, this FC that integrates 1S 12A ESC is definitely your best choice.


What is the update of the ELRS 2.4G V2.0 board?

  • Support both 1S and 2S battery now. Only 1S supported on V1.0.
  • Use SPI ExpressLRS 2.4 receiver with Betaflight firmware.
  • Modify the shape of the board to support 85mm whoop frame. Only toothpick frame supported on V1.0.
  • Use the lighter and smaller SH connector instead of USB Type-C.

 

FEATURES

  • F4 1S 12A AIO Flight Controller is the best choice for building ultra-lightweight 3" toothpick drones like HX115 SE FPV Quad.
  • Most of the 1S flight controllers on the market come with 5A ESC by now, but this FC especially integrates 1S 12A ESC, it can provide more sufficient power for 3" toothpick drones.
  • Built-in current meter, 2 programmable RGB LEDs, and SPI Frsky receiver. At the same time, all the pads are left for the external receivers with UART1 and UART2, for buzzers, etc.
  • Whoop mounting hole pattern, be compatible with most 1S 3" frames. Large pads are reserved for solder motor cables, this design will make solder easier.



Specification:

Built-in ESC with 12A continuous and peak 25A current

Input voltage: 1S Lipo (V1.0 board), 1S-2S (V2.0 board)

ESC firmware: Z_H_30_REV16_7.HEX

Signal support: D-shot150, D- shot300, D-shot600, Oneshot125, Multishot, PWM


Package Included:

1x F4 1S 12A AIO FC

4x Anti-vibration rubber dampers

4x M2 x 10mm screws

4x M2 x 10mm screws

8x M2 screw nut

1x BETAFPV dipole T antenna (2.4G/46mm, only for ELRS RX version board)

8x PH-1.25 connector for motor (not soldered, only for ELRS RX version board)


Uzrakstīt atsauksmi

Please login or register to review

BetaFPV F4 1S 12A AIO Brushless Flight Controller V2.1 - ELRS 2.4G

  • Ražotājs: BetaFPV
  • Produkta kods: ELRS 2.4G V2.1
  • Pieejamība: Izpārdots
  • 44.90€

  • bez PVN: 37.11€

Related Products

BetaFPV ELRS Micro TX Module 2.4G

BetaFPV ELRS Micro TX Module 2.4G

BETAFPV Micro RF TX module is based on the ExpressLRS project, an open-source RC link for RC applica..

49.90€ bez PVN: 41.24€

BetaFPV ELRS Nano TX Module 2.4G

BetaFPV ELRS Nano TX Module 2.4G

BETAFPV Nano RF TX module is based on the ExpressLRS project, an open-source RC link for RC applicat..

49.90€ bez PVN: 41.24€

BetaFPV ELRS Micro TX Module 2.4G 1W

BetaFPV ELRS Micro TX Module 2.4G 1W

BETAFPV Micro RF TX module is based on the ExpressLRS project, an open-source RC link for RC applica..

57.90€ bez PVN: 47.85€

BetaFPV ELRS SuperG TX Module 2.4G

BetaFPV ELRS SuperG TX Module 2.4G

Based on ELRS V3.3 and collaborated with ELRS developer team, the First Ever Gemini Dual-Frequency D..

82.90€ bez PVN: 68.51€

Tags: ELRS