FEATURES

• Uses the mainstream STM32F722 chip
•  Equipped with the latest 42688-P gyroscope
• 16M onboard black box storage
• Integrated LC filter
•  Upgraded Type-C USB interface
•  Directly plugs into the DJI Air Unit
• Paired with the TAKER H65_8S_BLS 65A 4IN1 ESC, providing a smooth flying experience
•  Simple and efficient installation method with shock absorbers for stable gyroscope performance
•  Dual independent BECs: 9V@2.5A and 5V@3A

Specification:

GEP-F722-HD v2 Flight Controller

MCU: STM32F722

IMU: ICM42688-P(SPI)

Air Unit Connection: Direct plug-in to DJI Air Unit

Black Box:16M onboard

USB Interface: Type-C

Barometer: supported

OSD: BetaFlight OSD w/ AT7456E chip

BEC: 5V@3A,9V@2.5A dual BEC

Firmware Target: GEPRCF722

Dimension: 36.85×36.85mm, mounting hole size 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.

Input Voltage: 3-6S LiPo

UART: 5

Power Filter: Integrated LC filter

Weight: 8.1g

TAKER H65_8S_BLS 65A 4IN1 ESC

Input Voltage: 3-8S Lipo

Ammeter: Supported

Continuous Current：65A

Burst Current：70A（5 seconds）

Support Protocol: Dshot 150/300/600

Dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

Weight: 14.9g

Firmware Target: B_X_30

Package Included:

1x Flight Controller

1x ESC

1x Capacitor

1x DJI Air Unit Adapter Cable

1x Flight Controller Adapter Cable

1x XT60 Power cable

4x M3*30 Screws

4x M3*25 Screws

8x Nylon nuts

8x Silicone grommets

2x sh1.0 4pinsilicone cable

1x Camera connection cable