F4 2-3S 20A AIO FC V1 is specifically designed for HD VTX, utilizing 2-3S batteries for enhancing the flight experience. It features a dual BEC solution that delivers stable power outputs of 9V@2A for DJI O3 and 5V@3A for external devices. With a 20A ESC, it enables agile flight and increases dynamic. And connector for DJI O3 HD VTX and USB port for easy installation and maintenance. Ideal for HD VTX whoop enthusiasts, offering a heightened level of professionalism and convenience with this FC option.

FEATURES

• Designed for HD VTX, it features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to prevent screen blackout on the DJI O3 due to low voltage during throttle increase.
• It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. Newbie friendly.
• The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single NMOS for continuous current capability.
• The upgraded onboard receiver allows selective power cutoff for saving power and offers additional UART TX3 and RX3 ports for connecting the external device.
• Redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning.
• It features an STM32F405RGT6 chip, Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter, reserve 3 complete serial ports and a standard SBUS, support GPS, HD VTX, external receiver, and other equipment.

Specification:

Weight: 5.58g (without motor connectors and power cable),5.92g (with motor connectors)

Mounting Hole Size: 26mm x 26mm

CPU*: STM32F405RGT6 (168MHz)

Six-Axis: ICM42688P (SPI connection)

RX: Serial ELRS 2.4G Receiver

RX firmware version: BETAFPV AIO 2400 RX ELRS V3.3.0

Antenna: Enameled wire

Blackbox Memory: 16MB

Sensor: Barometer (BMP280/DSP310),  Voltage & Current

5V BEC*: 5V 3A@8V supply

9V BEC*: 9V 2A@8V supply

USB Port: SH1.0 4-Pin

Built-in ESC with 20A continuous and peak 25A current

ESC input voltage: 2-3S

FC firmfware version: Betaflight_4.4.1_BETAFPVF405

ESC firmware: C_X_70_48_V0.19.2.hex for BB51 Bluejay hardware

Signal support: D-shot300, D-shot600

Package Included:

1x F4 2-3S 20A AIO FC V1

4x M2*10 Machine Screw 

4x M2*10 Nylon Screw 

4x M2 Nuts 

4x Shock Absorbing Ball 

4x JST1.25mm Angle Socket 

4x JST1.25mm Straight Socket 

1x SH1.0 4Pin Adapter Cable

1x Type-C to SH1.0 Adapter 

1x XT30 Power Cord

1x Filter Capacitor 

1x 30mm Double-head VTX connector wire 

1x 60mm Single-head VTX connector wire