FEATURES

• Use mainstream STM32F722 chip
• Equipped with the latest 42688-P gyroscope
• 512M black box storage
• Support Bluetooth parameter tuning
• Integrated LC filter
• Upgrade type-C USB interface
• With TAKER H65_8S_BLS 65A 4IN1 ESC, silky flight
• Directly plugs into the DJI Air Unit
•  Simple and effective installation with shock-absorbing mounts for stable gyroscope performance
• Integrated Barometer
• 11. 9V@2.5A + 5V@3A dual independent BEC

Specification:

GEP-F722-BT-HD V3 Flight Controller

MCU: STM32F722

IMU：ICM42688-P(SPI)

Air Unit Connection: Directly plugs into the DJI Air Unit

Black Box: 512M onboard

Bluetooth: Supported

Barometer: Supported

USB Interface: Type-C

OSD: BetaFlight OSD w/ AT7456E chip

BEC: 5V@3A, 9V@2.5A dual BEC

Firmware Target: GEPRCF722_BT_HD_V3

Size: 36.9×36.9mm, hole: 30.5×30.5mm, φ4mm hole becomes φ3mm after using a silicone shock-absorbing ring

Input Voltage: 3-6S LiPo

UART: 5 groups (UART4 fixed for Bluetooth)

Power Filter: Integrated LC filter

Weight: 8.2g

TAKER H65_8S_BLS 65A 4IN1 ESC

Input Voltage: 3-8S Lipo

Ammeter: Supported

Continuous Current：65A

Burst Current：70A（5 seconds）

Support Protocol: Dshot 150/300/600

Dimension：42×45.7mm,mounting hole size30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing ring.

Weight: 14.9g

Firmware Target: B_X_30

Package Included:

1x FC board

1x ESC board

1x Capacitor

1x O3 3-in-1 connection cable

1x FC adapter cable

1x sh1.0 4pin silicone cable

1x Camera connection cable

1x VTX connection cable

1x XT60 power cable

4x M3*30 screws

4x M3*25 screws

8x Nylon nuts

12x Silicone anti-shake pads