Covid-19 informācija: Pasūtījumi tiek izsūtīti katru dienu

OMNIBUS F4's upgrade version, using F405 and new target, with 5x UARTs now.

OSD Configuration has been incl. in Betaflight GUI.

FC incl. 5V1A BEC on board(3-6s).

MPU6000 at SPI bus, Ext, SPI for damped gyro

Use fireworks v2 firmware, in CLI, set gyro_to_use = SECOND

New version with 8PIN Sh1.0 Socket, could be much easier connect to our 4in1 ESC by one cable.

On v5, we added jumpers for Current source select, please read the manual and set the jumper before using the FC.


FEATURES

STM32 F405 MCU, Runs Betaflight 3.0 firmware

SBUS/PPM input (Pinheaders)

6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)

Only 36x36mm, mount holes 30.5x30.5mm

INCL. BARO BMP280

SPI Sensor MPU6000

Flash


Online guide here.



Package included:

1x AIO F4 V6 FC


N.B. FC only, no cables included

Uzrakstīt atsauksmi

Please login or register to review

Airbot Omnibus AIO F4 V6 OSD Flight Controller - 5xUARTs

  • Ražotājs: Airbot
  • Produkta kods: F4 AIO V6
  • Pieejamība: Izpārdots
  • 30.50€

  • bez PVN: 25.21€

Related Products

Cable JST 8 pin 30mm For 4in1 ESC

Cable JST 8 pin 30mm For 4in1 ESC

This is a silicone cable harness designed to connect your airbot flight controller directly to an ai..

1.15€ bez PVN: 0.95€

Cable JST 8 pin 70mm For 4in1 ESC

Cable JST 8 pin 70mm For 4in1 ESC

This is a silicone cable harness designed to connect your airbot flight controller directly to an ai..

1.15€ bez PVN: 0.95€

Cable set SH1.0

Cable set SH1.0

Pre-crimped silicone wires and spare JST SH1.0 connectorsPackage Included:12 x 55MM 12x 105MM 12x 15..

4.90€ bez PVN: 4.05€