Esam atvaļinājumā no 06.02 līdz 12.02. Visi pasūtījumi šajā periodā tiks apstrādāti 13.02. Paldies par sapratni!

The new ultralight Toothpick F405 2-4S AIO 20A FC is finally released! Compared with the V3 version, the new V4 board updates the F411 chip to F405. It can handle 20A of continuous current and up to 4S! Strong performance lets you break through the limits of your quad and explore more possibilities in the flight. Highly recommend using it on Beta95X V3 and Beta95X V3 HD Digital VTX to get a smooth flight. 


Note: The MPU6000 gyro is not available due to rising prices and lack of stock. We decide to change the gyro to BMI270 for the Toothpick series flight controller to continuously provide the product service.


FEATURES

  • Updated the F411 chip to F405, this new 20A AIO board handles a continuous current of 20A and a burst current of 22A, bringing pilots a more stable flight. 
  • BETAFPV 12A/20A AIO flight controller reserves the same UART ports layout, UART3 for Rx, UART4 for DJI, UART6 for SmartAudio and the Spare UART1, more convenient for pilots to solder.
  • Come with 2 integrated Plug & Play Ports for both digital VTX and Rx, less solder work needed, easy to install. 
  • Come with a 26mm x 26mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter like Beta95X V3 and Beta95X V3 HD Digital VTX. 


Know More About BMI270

BMI270 gyro works great in most cases, especially in low frequency. But it will need more software filters and is sensitive in high frequency. This can be solved by adjusting filter settings in PID tuning. You can flash our CLI file or set gyro lowpass 2 at 135Hz and choose filter type at PT2 in settings. This will help BMI270 gyro to get a similar performance as MPU6000 gyro. Below pictures show the difference between the two gyros.


Diagram



Specification:

CPU: STM32F405RGT6

Six-Axis: BMI270

Size: 26mm x 26mm, whoop mounting pattern

Firmware version: Batefight-BETAFPV405-4.2.X

OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver

Connecter: XT30, it also can be changed to XT60 if pilots need it.

Weight: 5.76g

Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

Input voltage: 2S-4S Lipo

Continuous current: 20A

Peak current: 22A

Firmware: BLHELI-32



Please Note: The chip of F405 V4 flight controller's ESC has changed to AT32F415 from STM32F105 due to shortage. While the AT32F415 is applicable to the ESC firmware version BETAFPV_20A_AT32.


Package Included:

1x Toothpick F405 20A AIO FC V4

1x Cable Pigtail (XT30)

4x M2x10mm screws

4x M2 nuts 

4x Anti-vibration rubber dampers

4x Motor Pluggable Pins

1x 6-Pin Connector for Digital VTX

1x 4-Pin Connector for Rx

Uzrakstīt atsauksmi

Please login or register to review

BetaFPV Toothpick F405 2-4S AIO Brushless Flight Controller 20A (BLHELI_32) V4

  • Ražotājs: BetaFPV
  • Produkta kods: 20A
  • Pieejamība: Noliktavā
  • 83.90€

  • bez PVN: 69.34€

Related Products

HQ T4X2X3 Grey 2CW + 2CCW

HQ T4X2X3 Grey 2CW + 2CCW

Specification:Propeller Diameter: 4 inch       Pitch : 2      &nb..

3.20€ bez PVN: 2.65€

BetaFPV 1505 3600KV Motoru Kompleks (4gab)

BetaFPV 1505 3600KV Motoru Kompleks (4gab)

Rated at 3600kv, 1505 motor hits the nice spot for high-powered 4s 4'' toothpick builds with the abi..

66.90€ bez PVN: 55.29€

TBS Source Podracer 5 drona rāmis

TBS Source Podracer 5 drona rāmis

The SOURCE PODRACER is a ultralight racing frame, made for speed addicts and grassroots fpv racers. ..

30.90€ bez PVN: 25.54€

HQ T4X2.5 Grey 2CW + 2CCW

HQ T4X2.5 Grey 2CW + 2CCW

Specification:Propeller Diameter: 4 inch       Pitch : 2.5      &..

3.20€ bez PVN: 2.65€

Tags: toothpick, ultra lite, bl32