The Mini POWER HUB has been engineered to provide the highest possible performance and reliability in a 36*36mm & 4 layers PCB.  

The HUB distributes power from a battery pack to 4 ESCs, as well as providing two synchronised & regulated DC outputs for powering cameras, 

servos, video transmitters, LEDs, etc. Batteries may range from 3S to 6S LiPo, and the BEC input is TVS protected.

The HUB also features convenient solder bridge of various voltage for camera & video transmitter.

- 2oz copper & 4-layers PCB.

- ESC & Battery solder tabs in pairs.

- Solder Bridges of various voltage for Camera & VTX.

- DC/DC synchronous buck regulator, Efficiency is up to 95%.

- TVS(Transient Voltage Suppressor) protection for DC/DC chip.

- 5V & 12V Output LED indicators & Short circuit tolerant.

Specs:

Dimensions: 36 x 36mm

Weight: About 6g

Mounting holes 30.5mm square spacing

ESC outputs:

Continuous current: 20A per output

Peak current (10 seconds/minute): 30A per output

BEC 5V output:

Voltage: 5.0 +/- 0.1VDC

Continuous current: 3 Amps               

Short-circuit tolerant (10 seconds/minute)

LED (indicates voltage is in regulation, within 10%)

BEC 12V output:

The battery should be 4S~6S LiPo

Standard output designed to power cameras and video transmitters,etc.

Voltage: 12.0 +/- 0.2VDC

Continuous current: 2 Amps (Max.3A 10s/minute)

Short-circuit tolerant (10 seconds/minute)

LED (indicates voltage is in regulation, within 10%)