Cidora SL5-E 4S FPV Drone -  with our best iFlight components installed and pre-tuned! SL5 is a 5" size quadcopter that comes fully built with everything you need to liftoff, all you need to do is add receiver!

FEATURES

• Full 3K Carbon Fiber airframe
• Easy arm swaps -215mm wheelbase，115g
• Popular Squish X configuration
• SucceX-E F4 with 45A 4in1 ESC stack

Specifications:

Total Dimensions: 165*138mm (body dimension)

Frame Wheelbase: 215mm

SucceX-E F4 Flight controller

SucceX-E 45A 2-6s 4-in-1 ESC Dshot1200

XING-E 2207 2450KV (4S)

Caddx.us Ratel 2.1mm FPV cam

Nazgul 5140 propellers grey

Weight: 384.2 (without GoPro TPU mount)

SucceX-E F4 Flight controller 

MCU：STM32F405

IMU：MPU6000

Betaflight OSD：YES

Blackbox：8MB

4X Uarts（1 2 3 6 )

8 x Dshot/Proshot/Oneshot output

8 x individual ESC power/ signal pads

1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

VTX protocol：YES（IRC Tramp）

WS2812 led Strip：YES

Baro：No

Beeper：YES

Input：2-6S（Max 8S）

BEC：5V/2.5A cont

Mounting：30.5*30.5mm，φ4mm with Grommets φ3mm

Dimensions：36*36mm

Weight：7.6g

Betaflight Firmware：betaflight_4.0.5_BETAFLIGHTF4.hex

SucceX-E 45A 4in1 ESC

Dimension: 40*43mm

Mounting Holes: 30.5*30.5mm/Φ3mm

Weight:14.4g

Supports 2-6S Lipo input

STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

Current sensor: YES

BEC: NO

Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.

Target: G-H-30 BLS 16.7

SucceX-Force 5.8g 25mW/100mW/400mW/800mW adjustable VTX

Input voltage: 5V

Channel: 48

SucceX the Force 5.8G 800mW VTX

Tramp telemetry with OSD/Lua script frequency and output power control

Stable power transmission, ideal for long-range flights

Power settings 25mW/200mW/400mW/800mW;

48 Channels including Raceband

Frequency fast lock, soft start to reduce interference with other pilots

Built-in output power self-check function;

Full format video format: NTSC /PAL;

Wide input voltage range. low power consumption:

7V～28V，+12V/[email protected];

Small size: 36mm×36mm×8mm;

Mounting holes 4-M3

Lightweight: ≤11g(excluding antenna)

Caddx.us Ratel 2.1mm lens FPV cam

Required (not included):

Transmitter

Receiver

FPV goggles

Battery (recommended 1300-2000mah 4S)

Battery Charger

Package Included:

1x Cidora SL5-E 4S FPV Drone - PNP

2x sets Nazgul 5140 propellers

NB: The Hero 7 camera and TPU print camera mount are not included.