Covid-19 informācija: Pasūtījumi tiek izsūtīti katru dienu

TWIG XL 3'' FPV Toothpick Quad-The first joint quad with Racer X FPV, but not the last one.


This TWIG XL X version frame is definitely the most popular frame at present. The performance and power to weight ratio of this frame design is out of this world! With the Caddx Ratel Camera, 1404 3800KV Brushless Motors, 12A Toothpick F4 2-4S AIO FC, it supports 450mAh 4S battery and provides you a super efficient flight experience. What is more, we adopt the injection molded canopy, protecting your camera well even in a several severe crashing. 


Specification:

Weight: 104.2g (without battery)

FC&ESC:12A Toothpick F4 2-4S AIO FC

Motors: 1404 3800KV Brushless Motors

Props: Gemfan 3016 3-Blade Props

Camera: Caddx Ratel Camera

VTX: A01 25-200mW 5.8G VTX

Frame: TWIG XL Frame

Canopy: Injection Molded Canopy for TWIG

Receiver : Frsky XM+

Battery: 450mAh 4S battery(NOT included)

Flight time: 3:00-5:00mins


FC & ESC SPECIFICATIONS

Toothpick F4 2-4S 12A AIO FC- Integrated with a Betaflight MATEKF411RX processor FC, Betaflight OSD and 2-4S 12A ESC, support 4S battery for fast-flying experience

FC

CPU: STM32F411CEU6 (100MHZ)

Six-Axis: MPU6000 (SPI connection)

Size: 32.5*32.5mm (26.5mm mounting holes)

Firmware version: Betaflight MATEKF411 (MK41)

OSD: Build-in BetaFlight OSD (OSD chip: AT7456E)

Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver. 

Support programmable LED like WS2812 etc

Built-in current sensor

Weight: 6.2g(Without Pins), 6.5g(Pins Pre-solder)

ESC

Support BLheli/BLHELI_S suite Pass-through ready

Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600

Input voltage: 2S-4S Lipo

Continue current: 12A

Peak current: 15A

Firmware: BLHELI_S

Processor: SILABS EFM8BB21F16G-C

Motor Connectors: 1.25mm header pins connector

Factory firmware: G-H-30-16.7



CAMERA & VTX

The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18" HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.


A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.



Package included:

1x TWIG XL 3'' FPV Quad

1x HQ 3016 3-Blade Props (4pcs)

1x Set of M2*7 screws

Uzrakstīt atsauksmi

Please login or register to review

BetaFPV TWIG XL 3'' FPV Toothpick Quad - Frsky LBT

  • Ražotājs: BetaFPV
  • Produkta kods: TWIG XL 3 - Frsky LBT
  • Pieejamība: Izpārdots
  • 190.90€

  • bez PVN: 157.77€

Related Products

HQ T3X2.5X3 Grey 2CW + 2CCW

HQ T3X2.5X3 Grey 2CW + 2CCW

Specification:Propeller Diameter: 3 inch       Pitch : 2.5      &..

2.20€ bez PVN: 1.82€

BetaFPV LiteRadio 2 Pults Frsky - Mode 2

BetaFPV LiteRadio 2 Pults Frsky - Mode 2

Pēc ilgiem izmēģinājumiem, LiteRadio 2 ir atgriezies un tam ir veikti lieli uzlabojumi salīdzinot ar..

45.90€ bez PVN: 37.93€

HQ T3X1.5X3 Grey 2CW + 2CCW

HQ T3X1.5X3 Grey 2CW + 2CCW

Specification:Propeller Diameter: 3 inch       Pitch : 1.5      &..

2.20€ bez PVN: 1.82€

BetaFPV Toothpick F4 2-4S AIO Brushless Flight Controller 12A (BLHeli_S)

BetaFPV Toothpick F4 2-4S AIO Brushless Flight Controller 12A (BLHeli_S)

The new layout 12A 2-4S F4 AIO FC(BLHeli_S) is customized for Toothpick Drone. With the real holes, ..

49.90€ bez PVN: 41.24€

BetaFPV LiteRadio 2 Pults Frsky Melna - Mode 2

BetaFPV LiteRadio 2 Pults Frsky Melna - Mode 2

Pēc ilgiem izmēģinājumiem, LiteRadio 2 ir atgriezies un tam ir veikti lieli uzlabojumi salīdzinot ar..

45.90€ bez PVN: 37.93€

Tags: bnf, tiny whoop, futaba, frsky